An all-round convincing concept
The ball shaped pumphead sits in a ball joint and can be turned right round. Thus the outflow of the filtered water can be aimed in any direction.
The pump output and throughflow can be set by the control knob on the outflow nozzle.
The power-diffusor is adjusted to regulate the air intake and thus the oxygen enrichment in the aquarium.
(Instead of the diffusor, other extension pieces can be used; see accessories)
Directly under the pumphead is a mediabox. It can be filled with:
a filter pad for mechanical-biological filtration,
a fine filter pad for fine filtration/polishing,
bioMECH or SUBSTRATpro for biological filtration or
EHEIM AKTIV for adsorptive filtration.
Also biological as well as adsorbtive filter cartridges or filter pads can be placed in the other filter modules.
aquaball has a modular construction. This means that by adding or removing filter modules (filter baskets) you can adjust the filter volume as necessary.
For extending the filter use ExtensionSET2
The filter baskets can be easily clipped together and released (Easy-Klick Locking System)
Due to the modular construction the filter cartridges or media can be cleaned at different intervals thus preserving bacteria cultures.
aquaball sucks in water over a large surface area. The round filter modules are designed so that the water is absorbed evenly from all sides over almost the whole surface area.
The holder for aquaball is simply fixed to the glass with suction cups. For cleaning, exchanging modules or filling with filter media, the filter is simply removed from its holder.
An all-round convincing concept
The ball shaped pumphead sits in a ball joint and can be turned right round. Thus the outflow of the filtered water can be aimed in any direction.
The pump output and throughflow can be set by the control knob on the outflow nozzle.
The power-diffusor is adjusted to regulate the air intake and thus the oxygen enrichment in the aquarium.
(Instead of the diffusor, other extension pieces can be used; see accessories)
Directly under the pumphead is a mediabox. It can be filled with:
a filter pad for mechanical-biological filtration,
a fine filter pad for fine filtration/polishing,
bioMECH or SUBSTRATpro for biological filtration or
EHEIM AKTIV for adsorptive filtration.
Also biological as well as adsorbtive filter cartridges or filter pads can be placed in the other filter modules.
aquaball has a modular construction. This means that by adding or removing filter modules (filter baskets) you can adjust the filter volume as necessary.
For extending the filter use ExtensionSET2
The filter baskets can be easily clipped together and released (Easy-Klick Locking System)
Due to the modular construction the filter cartridges or media can be cleaned at different intervals thus preserving bacteria cultures.
aquaball sucks in water over a large surface area. The round filter modules are designed so that the water is absorbed evenly from all sides over almost the whole surface area.
The holder for aquaball is simply fixed to the glass with suction cups. For cleaning, exchanging modules or filling with filter media, the filter is simply removed from its holder.
The small corner internal filter with big benefits
aquaCorner had been developed especially for small aquariums (vgl. auch Nano-Aquarium EHEIM aquastyle).
It is designed for small volumes of water, therefore keeping the sensitive ecosystem in equilibrium, ensuring constant water circulation and preventing different levels of temperature.
Because it is a corner filter, it takes up little space and therefore leaves more room for livestock, plants and decoration.
Its suction is regulated, so that small creatures (e.g. young shrimps, young fish) don’t get sucked in. Furthermore, it is fixed so close to the glass that no livestock can get trapped in the gap.
The construction is ingenious: the filter is easy to flip open. In the head there is a filter pad as a pre-filter, behind it the mediabox, filled with e.g. EHEIM SUBSTRAT pro (also suitable for other bio-filter media as well as activated carbon, phosphate remover etc.)
The filter or motor unit stays in the tank for cleaning or refilling. The parts are simply removed and then put back into place.
In the top there is a dosing chamber for water treatments, fertiliser etc.
The aquaball concept with external filter technology
External filter technology and multi-layer filtration – that means: the water at the bottom is pumped to the top through the various filter layers and after filtration directed back into the tank.
The closed filter baskets come prefilled with EHEIM SUBSTRATpro. Other filter media can also be used.
The inlet basket contains a filter cartridge for the mechanical-biological prefiltration. In the pumphead holder a filter pad provides additional filtration.
By adding or removing filter modules (filter baskets) you can adjust the filter volume as necessary.
For extending the filter use ExtensionSET2
The filter baskets can be easily clipped together and released (Easy-Klick Locking System)
Due to the modular construction the filter cartridges or media can be cleaned at different intervals thus preserving bacteria cultures.
The ball shaped pumphead sits in a ball socket and can be turned right round. Thus the outflow of the filtered water can be aimed in any direction.
The pump output and throughflow can be set by the control knob on the outflow nozzle.
The power-diffusor is adjusted to regulate the air intake and thus the oxygen enrichment in the aquarium.
(Instead of the diffusor, other extension pieces can be used; see accessories)
The holder for biopower is simply fixed to the glass with suction cups. For cleaning, exchanging modules or filling with filter media, the filter is simply removed from its holder.
The aquaball concept with external filter technology
External filter technology and multi-layer filtration – that means: the water at the bottom is pumped to the top through the various filter layers and after filtration directed back into the tank.
The closed filter baskets come prefilled with EHEIM SUBSTRATpro. Other filter media can also be used.
The inlet basket contains a filter cartridge for the mechanical-biological prefiltration. In the pumphead holder a filter pad provides additional filtration.
By adding or removing filter modules (filter baskets) you can adjust the filter volume as necessary.
For extending the filter use ExtensionSET2
The filter baskets can be easily clipped together and released (Easy-Klick Locking System)
Due to the modular construction the filter cartridges or media can be cleaned at different intervals thus preserving bacteria cultures.
The ball shaped pumphead sits in a ball socket and can be turned right round. Thus the outflow of the filtered water can be aimed in any direction.
The pump output and throughflow can be set by the control knob on the outflow nozzle.
The power-diffusor is adjusted to regulate the air intake and thus the oxygen enrichment in the aquarium.
(Instead of the diffusor, other extension pieces can be used; see accessories)
The holder for biopower is simply fixed to the glass with suction cups. For cleaning, exchanging modules or filling with filter media, the filter is simply removed from its holder.
Micro internal filter for terrariums and paludariums with a shallow water area or water bowls(e.g. for frogs, semi-aquatic reptiles, cray fish etc.)This unique little flat water filter is designed differently to an internal aquarium filter: It doesn’t hang on to anything, but rather sits horizontally in the water. It is fixed to the tank/bowl with suction cups. It draws thewater in from below, pumps it through the filter sponge and directs it out, filtered, at the top. The surface water movement makes the reptiles drinking water visible. If you want to adjust the outflow direction, you can attach an outlet hose.
Water intake from below
Connection for water outlet hose
Completely equipped with original EHEIM filter pad and ready to use
Only 5 Watt power consumption
With the EHEIM miniUP micro-internal filter your nano-aquarium gets attractive and practical add-ons.It is small, attractive, gives excellent performance and is easy to attach to the tank with suction cups. The filter draws in the water from below through slits, pumps it through the filter sponge and directs it further up filtered back into the tank. You can also attach an outflow hose and then you are able to adjust the outflow direction. – It’s quite simply an attractive and practical filter in a compact size. Benefits of the EHEIM miniUP
Mini-internal filter for aquariums (nano tanks) 25 up to 30 l
Attractive, slim design
Water inlet from below
Connector for outflow hose
Comes completely equipped with filter sponge, immediately ready to start up
Only 5 W energy usage
EAN: 4011708224595
Artikel-Nr.: 2204020
$0.01*
We use cookies on our website for analysis purposes and other third-party tools. You can refuse or enable them by clicking on "Configure". You can call up these settings and change them at any time using the "Cookie settings" link in the footer of our website. You will find further information in our data protection declaration. Further information ...