EHEIM classicLED ‘daylight’ LED lights are available in six lengths from 550 to 1300 mm and is easy to install using the extendable mounting bracket. The LED strip adapts perfectly to any aquarium up to a width of 1.30 m, giving optimal illumination with a beam angle of 120˚, down to the bottom of the aquarium. The ultra compact and very slim design fits under all covers and can therefore be used for most aquariums.
With a daylight similar colour temperature of 6500 Kelvin, EHEIM classicLED ensures the healthy growth of fish and plants. The water appears pleasantly clear to the viewer.
The power consumption of the classic LEDs range from 7,7 to 17,3 watts, depending on the length. EHEIM classicLEDs are waterproof (IPx7) and are especially safe due to the low voltage technology with an average durability of at least 35,000 hours
The EHEIM classic LEDs are available and include the LED safety power supply.
With EHEIM classicLED plants your underwater landscape appears more natural and the plants grow better.
The light spectrum of the classicLED ‘plants’ is specially designed for aquatic plants. A higher red component gives the light a more natural appearance and the underwater world has noticably more colour depth and the plants grow better.
EHEIM classicLED ‘plants’ LED lights are available in four lengths from 550 to 1200 mm. The LED strip is very easy to install thanks to the extending brackets and can be adapted to fit any aquarium up to a width of 1.20 metres. With a beam angle of 120°, it ensures full illumination to the bottom of the aquarium. The ultra-compact and very slim design fits under all covers and can therefore be used for almost all aquariums. If you want to switch from power-intensive T5/T8 fluorescent tubes to LED lighting, you can do so quite simply with the corresponding adapter set (accessory).
The power consumption is between 7.7 and 17.3 watts, depending on the length. The average life is at least 35,000 hours. Advantages of the EHEIM classicLED plants
Alternative to T5/T8 fluorescent tubes - interchangeable with adapter set (accessory)
LED strip easy to install
4 lengths for aquariums from 55 - 120 cm width (continuously adjustable) due to extendable support brackets)
High-quality, sturdy aluminium housing
Absolutely waterproof (IPx7) and particularly safe due to low-voltage technology
Bright sunlight (8350 K) and light spectrum matched to aquatic plants (photosynthesis) with high red components
Promotes healthy growth in plants and animals
Natural, unadulterated colour rendering
Beam angle 120°
Full illumination to the bottom of the aquarium
Average life min. 35 000 hours (9-10 years at 10 hours/day)
High energy efficiency and light output (approx. 80 lm/W)
Only suitable for fresh water
3 year warranty
The new EHEIM powerLED+ is the perfect lighting for your aquarium
From the full spectrum of sunlight to white and / or actinic light – our new LED lamps cover the entire range. All spectrums are carefully balanced to support the growth of either plants or corals and to enhance the natural colours in the aquarium. The LED’s can be adjusted to fit any aquarium by extending the brackets to the correct length or existing fluorescent tubes can be replaced with our LED by inserting the specially designed adapter into the existing light unit. EHEIM quality – made in Germany.Advantages of the EHEIM powerLED+
High-quality and efficient alternative to T5 fluorescent tubes (incl. reflector!)
Full depth lighting - even in deep aquariums.
LED strips can be combined to create the perfect balance for plant or coral growth
Full sunlight spectrum with maximum output for photosynthesis (fresh water).
Reproduces the natural colours in the aquarium
Average service life > 50.000 hours
High-quality, solid aluminium housing (anodised), marine water resistant
8 lenghts available to fit aquariums from 36 – 135 cm long (lengths can be adjusted by extending the stainless steel support brackets).
Suitable for use with existing fluorescent light tube units (T8, T5); existing tubes can be replaced by inserting the EHEIM T8-/T5 adapter (see accessories)
Single and double wire suspension available for open aquariums (see accessories)
Highly efficient safety power supply (24V) saves energy
Several lamps can be connected to one power supply unit with our Y adaptor (accessories)
Can be used with LEDcontrol
EHEIM powerLED fresh daylight
Bright daylight (7,000 K) with full sunlight spectrum (full spectrum).
Natural colour representation of the fish and plants.
Balanced blue and/or red spectrum range for good plant growth.
Maximum energy efficiency (120 lm/W) and brightness.
Can also be combined with EHEIM powerLED plants for particularly demanding plants.
The new EHEIM powerLED+ is the perfect lighting for your aquarium
From the full spectrum of sunlight to white and / or actinic light – our new LED lamps cover the entire range. All spectrums are carefully balanced to support the growth of either plants or corals and to enhance the natural colours in the aquarium. The LED’s can be adjusted to fit any aquarium by extending the brackets to the correct length or existing fluorescent tubes can be replaced with our LED by inserting the specially designed adapter into the existing light unit. EHEIM quality – made in Germany.Advantages of the EHEIM powerLED+
High-quality and efficient alternative to T5 fluorescent tubes (incl. reflector!)
Full depth lighting - even in deep aquariums.
LED strips can be combined to create the perfect balance for plant or coral growth
Full sunlight spectrum with maximum output for photosynthesis (fresh water).
Reproduces the natural colours in the aquarium
Average service life > 50.000 hours
High-quality, solid aluminium housing (anodised), marine water resistant
8 lenghts available to fit aquariums from 36 – 135 cm long (lengths can be adjusted by extending the stainless steel support brackets).
Suitable for use with existing fluorescent light tube units (T8, T5); existing tubes can be replaced by inserting the EHEIM T8-/T5 adapter (see accessories)
Single and double wire suspension available for open aquariums (see accessories)
Highly efficient safety power supply (24V) saves energy
Several lamps can be connected to one power supply unit with our Y adaptor (accessories)
Can be used with LEDcontrol
EHEIM powerLED+ fresh plants
Full spectrum sunlight (9.500 K) for photosynthesis (royal blue 445 nm and warm white with an enhanced red component)
Encourages healthy growth in demanding plants
Perfect for Lake Malawi and Lake Tanganyika aquariums
Enhances the natural blue and red tones of fish and plants
Maximum energy efficiency and light output (93 lm/W)
Can be used as a single light source or in combination with EHEIM powerLED+ fresh daylight
The new EHEIM powerLED+ is the perfect lighting for your aquarium
From the full spectrum of sunlight to white and / or actinic light – our new LED lamps cover the entire range. All spectrums are carefully balanced to support the growth of either plants or corals and to enhance the natural colours in the aquarium. The LED’s can be adjusted to fit any aquarium by extending the brackets to the correct length or existing fluorescent tubes can be replaced with our LED by inserting the specially designed adapter into the existing light unit. EHEIM quality – made in Germany.
EHEIM powerLED+ marine hybrid
Optimal combination of white and royal blue light (1:1)
High light output and coordinated spectrum in the areas important for photosynthesis
Promotes colour reproduction (fl uorescence) and the growth of corals
One EHEIM powerLED+ marine hybrid replaces one T8-/T5 fluorescent tube of the appropriate length including reflector
Royal blue LEDs (445-450 nm), Beam angle 120˚
Average life > 50.000 hours (13–14 years at 10 hours per day)
*This light source is intended exclusively for fl uorescence and for coral zooxanthellae symbioses.
The new EHEIM powerLED+ is the perfect lighting for your aquarium
From the full spectrum of sunlight to white and / or actinic light – our new LED lamps cover the entire range. All spectrums are carefully balanced to support the growth of either plants or corals and to enhance the natural colours in the aquarium. The LED’s can be adjusted to fit any aquarium by extending the brackets to the correct length or existing fluorescent tubes can be replaced with our LED by inserting the specially designed adapter into the existing light unit. EHEIM quality – made in Germany.
EHEIM powerLED+ marine hybrid
Optimal combination of white and royal blue light (1:1)
High light output and coordinated spectrum in the areas important for photosynthesis
Promotes colour reproduction (fl uorescence) and the growth of corals
One EHEIM powerLED+ marine hybrid replaces one T8-/T5 fluorescent tube of the appropriate length including reflector
Royal blue LEDs (445-450 nm), Beam angle 120˚
Average life > 50.000 hours (13–14 years at 10 hours per day)
*This light source is intended exclusively for fl uorescence and for coral zooxanthellae symbioses.
With the EHEIM powerRGB you will experience your aquarium like never before!
Intensify the colours in your aquarium with the EHEIM powerRGB, a great addition to your aquarium lighting. To use it you need the wireless lighting control RGBcontrol+e, which will enable millions of colour nuances. This allows you - even in sync with standard lighting - to create lighting scenes depending on the time of day, such as letting clouds gather, staging dawn and dusk, simulating atmospheric moonlight with a natural cycle, and much more. There are no limits to your imagination, or configuration.
Features of EHEIM powerRGB
Additional light for your aquarium lighting.
Ensures particularly intensive colouring of your animals and plants.
Comes in 8 sizes from 36 - 135 cm (adjustable with extendable stainless steel bracket holders).
Controlled by wireless lighting control EHEIM RGBcontrol+e.
Extremely efficient RGB lighting with long service life (70 lm/W).
Particularly safe and power efficient due to low-voltage technology.
Suitable for fresh and marine water.
Highest safety and reliability – comes with 3 years warranty.
We use cookies on our website for analysis purposes and other third-party tools. You can refuse or enable them by clicking on "Configure". You can call up these settings and change them at any time using the "Cookie settings" link in the footer of our website. You will find further information in our data protection declaration. Further information ...